Samsung mini split error code E468
Current sensor fault.
- TypeFault
- SystemControl board
- Can I fix it?Technician job
What E468 means on a Samsung
The outdoor board's compressor current sensor is reading an impossible value.
On this platform, E468 is a fault: something has failed or is disconnected and needs diagnosis.
Common causes
- A failed sensor or board.
How to fix it yourself
Do the reset and the visual checks, but the underlying repair needs a technician with a meter and the service manual.
- Reset the system: switch the breaker (or the outdoor disconnect) off, wait a full five minutes so the boards fully discharge, then switch it back on and restart from the remote.
Switch off power at the breaker before opening either unit. Capacitors in the outdoor unit hold a charge for several minutes after power is cut.
When to call a technician
Board-level fault.
Which Samsung units show E468
This page applies to Samsung Wind-Free, Quantum, Max Heat and Free Joint Multi units. Samsung's own documentation lists E468 as "Current sensor fault", the same definition used across the Samsung it is built on. If your unit shows a code with a different shape (for example a four-character code, or a plain number), it is from a different table; use the lookup with your exact code.
Where Samsung shows this code
The indoor display shows E followed by three digits (E101, E554). Units without a full display blink the indicator lamps in a pattern the manual decodes; the outdoor board's 7-segment display or LEDs show the same code. E1xx codes are indoor-unit faults, E2xx are communication faults, E4xx are outdoor sensors, protections and inverter faults, and E5xx are outdoor board and refrigerant faults.
Other Samsung codes
Same part of the system as E468:
Questions people ask
Can I reset a Samsung E468 code myself?
Yes. Turn the system off at the breaker for five minutes, then restart it. If E468 comes back, the fault is real and needs the checks above.
Is it safe to keep running a Samsung showing E468?
The unit will usually refuse to run, or run with reduced output, until the fault is cleared. Repeated resets do not fix anything and can mask a problem that is getting worse.
What will a technician check for E468?
Board-level fault. Ask for the measurements, not just a parts quote.
Sources
- Samsung residential split service manuals (error code tables)
Updated September 2026. Codes and definitions vary by model year. If your manual disagrees with this page, your manual wins. Send a correction.