Comfortmaker mini split error code PH
DC bus high voltage (over-voltage) protection.
- TypeProtection
- SystemPower supply
- Can I fix it?Homeowner checks, then maybe a tech
- Applies toDLC4 / DLF4 series, 2013 to 2015 (Gree-built)
What PH means on a Comfortmaker
The DC bus voltage inside the outdoor unit rose above its limit and the compressor stopped.
On this platform, PH is a protection: the system stopped or throttled itself to prevent damage; many clear on their own once conditions return to normal.
Common causes
- A utility voltage spike or a surge.
- A generator or inverter with poor regulation.
- A failed PFC stage or capacitor on the outdoor board.
How to fix it yourself
Work through the checks below first; they resolve most cases. If they do not, the repair itself may need a technician.
- Reset the system: switch the breaker (or the outdoor disconnect) off, wait a full five minutes so the boards fully discharge, then switch it back on and restart from the remote.
- If you own a multimeter and are comfortable using it, measure the supply voltage at the outdoor unit's L1 and L2 terminals with the unit running. A 230 V system should read roughly 208 to 253 VAC.
- If your supply is prone to spikes, add a dedicated HVAC surge protector.
Switch off power at the breaker before opening either unit. Capacitors in the outdoor unit hold a charge for several minutes after power is cut.
When to call a technician
Normal supply voltage with a persistent PH means the outdoor board.
Which Comfortmaker units show PH
This page applies to Comfortmaker DLCSRA / DLCSRB / DLCLRA outdoor with DLFSHA / DLFSFA indoor (2015 and later) and DLC4 / DLF4 (2013 to 2015) units on the DLC4 / DLF4 series, 2013 to 2015 (Gree-built). Comfortmaker's own documentation lists PH as "DC bus high voltage (over-voltage) protection", the same definition used across the Gree platform it is built on. If your unit shows a code with a different shape (for example a four-character code, or a plain number), it is from a different table; use the lookup with your exact code.
Where Comfortmaker shows this code
DLC4 / DLF4 series, 2013 to 2015 (Gree-built): The code shows on the indoor unit's display in place of the temperature. If the display is off, press the Light button on the remote. Some models also count out the code as indicator blinks. E codes are system protections and faults, F codes are mostly sensor faults, H codes are outdoor and compressor protections, U codes are motor and valve faults, and P codes are power-supply faults.
Other Comfortmaker codes
Same part of the system as PH:
PH on other brands
The same characters do not always mean the same thing. Check the brand on your unit.
- Blueridge PH DC bus high voltage (over-voltage) protection
Questions people ask
Can I reset a Comfortmaker PH code myself?
Yes. Turn the system off at the breaker for five minutes, then restart it. If PH comes back, the fault is real and needs the checks above.
Is it safe to keep running a Comfortmaker showing PH?
Not repeatedly. A protection code means the unit stopped itself to prevent damage, and resetting it over and over can turn a cheap repair into a compressor failure. Reset once, check the basics, and stop if it returns.
Do I need a technician for Comfortmaker PH?
Work through the checks below first; they resolve most cases. If they do not, the repair itself may need a technician. Normal supply voltage with a persistent PH means the outdoor board.
Sources
- ICP DLCSRA Outdoor Unit Single Zone Ductless Service Manual 32808000801 (error code table)
- ICP ductless installation instructions IM-KSAIC04-04 (DLCPRA / DLCSRB / DLCERB / DLCLRA error codes)
- ICP R-410A Ductless Split System Service Manual 421 01 9204 00 (DLC4 / DLF4, 2013)
Updated September 2026. Codes and definitions vary by model year. If your manual disagrees with this page, your manual wins. Send a correction.