Bryant mini split error code P2
High temperature protection (compressor top or inverter module).
- TypeProtection
- SystemCompressor / inverter
- Can I fix it?Homeowner checks, then maybe a tech
- Applies toindoor display, classic two-character codes
What P2 means on a Bryant
Either the thermal protector on top of the compressor opened or the inverter module (IPM) got too hot; different Midea-built models assign P2 to one or the other. Both come down to the outdoor unit not shedding heat. The compressor is being protected from overheating.
On this platform, P2 is a protection: the system stopped or throttled itself to prevent damage; many clear on their own once conditions return to normal.
Common causes
- Blocked outdoor coil or a failed outdoor fan (in cooling mode).
- Low refrigerant charge, which makes the compressor run hot.
- Service valves partly closed, or a kinked or restricted line set.
- Extremely high outdoor temperatures combined with a dirty coil.
- A failing compressor.
How to fix it yourself
Work through the checks below first; they resolve most cases. If they do not, the repair itself may need a technician.
- Look at the outdoor unit: clear leaves, cottonwood fluff, snow or ice from the coil and make sure the fan can spin freely and nothing is stacked against the cabinet.
- Give the unit 30 to 60 minutes with the power off to cool down, then restart.
- Confirm both service valves are fully open.
- Inspect the line set for kinks, especially at tight bends near the wall penetration.
- Anything inside the refrigerant circuit (sensors are fine, but valves, compressors and leaks are not) needs EPA-certified refrigerant handling. That is a technician job.
Switch off power at the breaker before opening either unit. Capacitors in the outdoor unit hold a charge for several minutes after power is cut.
When to call a technician
If it returns after the coil is clean and the fan runs, have a technician check the charge and the discharge temperature.
Which Bryant units show P2
This page applies to Bryant Preferred 619P*B / 538P*B high wall, 619RC / 538PR cassette and Bryant multi-zone units on the indoor display, classic two-character codes. Bryant's own documentation lists P2 as "High temperature protection (compressor top or inverter module)", the same definition used across the Midea platform (classic codes) it is built on. If your unit shows a code with a different shape (for example a four-character code, or a plain number), it is from a different table; use the lookup with your exact code.
Where Bryant shows this code
indoor display, classic two-character codes: The code appears on the indoor unit's LED display in place of the set temperature. Some models also blink the indicator lamps in a pattern that matches the code. E codes are faults in the indoor unit or its communication link, F codes are faults on the outdoor side, and P codes are protections: the outdoor unit has stopped itself to prevent damage. EC is the refrigerant leak check.
Other Bryant codes
Same part of the system as P2:
P2 on other brands
The same characters do not always mean the same thing. Check the brand on your unit.
- Pioneer P2 High temperature protection (compressor top or inverter module) / Low pressure protection (outdoor display)
- Blueridge P2 High temperature protection (compressor top or inverter module)
- Zone Air P2 Over-current protection
- Mitsubishi Electric P2 Indoor pipe (liquid) temperature sensor fault (open or short circuit)
- Trane P2 Over-current protection / Indoor pipe (liquid) temperature sensor fault (open or short circuit)
- ACiQ P2 High temperature protection (compressor top or inverter module) / Over-current protection
Questions people ask
Can I reset a Bryant P2 code myself?
Yes. Turn the system off at the breaker for five minutes, then restart it. If P2 comes back, the fault is real and needs the checks above.
Is it safe to keep running a Bryant showing P2?
Not repeatedly. A protection code means the unit stopped itself to prevent damage, and resetting it over and over can turn a cheap repair into a compressor failure. Reset once, check the basics, and stop if it returns.
Do I need a technician for Bryant P2?
Work through the checks below first; they resolve most cases. If they do not, the repair itself may need a technician. If it returns after the coil is clean and the fan runs, have a technician check the charge and the discharge temperature.
Sources
- Bryant 619P*B High Wall Ductless Owner's Manual OM-619PB-06 (self-diagnostic codes)
- Carrier 40MAQ / 38MAQ and 38MHRB service manuals (identical Midea-built equipment)
Updated September 2026. Codes and definitions vary by model year. If your manual disagrees with this page, your manual wins. Send a correction.