Bryant mini split code LL

What to do

You can almost always clear this yourself with the steps below.

1. See your remote's manual for the lock combination; on many Midea-built remotes it is holding the up and down arrows together.

When to call a technician

This is not a fault. No technician is needed unless it will not clear.

Which Bryant units show LL

This page applies to Bryant Preferred 619P*B / 538P*B high wall, 619RC / 538PR cassette and Bryant multi-zone units on the indoor display, four-character codes (newer units). Bryant's own documentation lists LL as "Remote or wired controller locked", the same definition used across the Midea platform (four-character codes) it is built on. If your unit shows a code with a different shape (for example a four-character code, or a plain number), it is from a different table; use the lookup with your exact code.

Where Bryant shows this code

indoor display, four-character codes (newer units): The display shows a two-letter prefix and a two-character suffix, either together (EH60) or alternating (EH, then 60). Write both parts down; the suffix is what identifies the fault. EH and EL are indoor-side faults, EC is an outdoor-side fault, and PC is an outdoor protection: the unit stopped itself to prevent damage.

Other Bryant codes

Same part of the system as LL:

All Bryant error codes

LL on other brands

The same characters do not always mean the same thing. Check the brand on your unit.

• Pioneer LL Remote or wired controller locked